Get named by ChatGPT and book more jobs. Your free demo site is held for20:00Claim it →
Handyman Website ProFree demo site →

Home › Guides › Should a Handyman Hire Employees or Subcontractors?

Should a Handyman Hire Employees or Subcontractors?

Short answer: A handyman business usually hires an employee when the helper works your schedule, drives your van and does the jobs your way, and uses subcontractors for whole jobs they run on their own, such as licensed electrical or plumbing work. The IRS decides by control and money, not by the label, so check with your accountant or state.

Key facts
  • The IRS sorts workers by behavioral control, financial control and the type of relationship.
  • Either the business or the worker can file IRS Form SS-8 for an official status ruling.
  • The DOL says misclassified workers may miss the minimum wage and overtime they are owed.
  • The SBA lists workers' compensation as a required benefit for businesses with employees.
  • BLS puts general maintenance and repair worker median pay at $49,590 a year in 2025.
  • BLS says these workers usually learn by watching skilled maintenance workers.

A one-person handyman business hits a ceiling fast. You are the estimator, the driver, the buyer and the person on the ladder. The first hire is a big step, and the first question is how to hire: as a W-2 employee or as a 1099 subcontractor. This page compares the two for handyman work and shows how to make the first hire.

What is the difference between an employee and a subcontractor?

An employee is a worker whose job you control: when they work, how they do it and what tools they use. You withhold taxes from their pay. A subcontractor is a separate business you hire to do a defined piece of work. They control how it gets done, bring their own tools and send you an invoice.

The IRS does not let you pick a label and stop there. It looks at three groups of facts (IRS: Independent contractor (self-employed) or employee?):

  • Behavioral control. Does the business control, or have the right to control, what the worker does and how?
  • Financial control. Does the business control the money side of the job, such as pay, tools and expenses?
  • Type of relationship. Are there written contracts or employee-type benefits, and is the work a key part of the business?

How do employees and subcontractors compare for handyman work?

Here is how the two choices tend to line up in a handyman business. Use it to see which way your setup leans, then confirm with your accountant.

W-2 employee (helper or tech)1099 subcontractor
Who sets the day?You set the route and job orderThey set their own hours to meet your deadline
Tools and vanUsually yoursUsually theirs
How you payHourly or salary, through payrollPer job or per bid, on their invoice
TaxesYou withhold and pay employer taxesThey pay their own; you collect a W-9
Workers' compYou carry itThey carry their own policy
TrainingYou can train them your wayYou hire them for skills they already have
Customer seesYour shirt, your truck, your nameOften their own business name
Fits best forPunch lists, small repairs, the daily routeWhole jobs: a bathroom tile job, licensed trade work
Main riskPayroll cost in slow weeksMisclassification if you control them like staff

The pattern: the more a person looks like part of your daily crew, the more they look like an employee. The more they run their own business and take whole jobs from several customers, the more they look like a subcontractor.

What happens if you call a helper a 1099 when they are really an employee?

This is the common mistake. A handyman pays a helper cash or on a 1099, tells them where to be at 8 a.m., hands them the drill and the van keys, and shows them how to hang a door. On those facts, the helper looks like an employee.

The IRS says if you classify an employee as an independent contractor with no reasonable basis, you may be held liable for employment taxes for that worker (IRS: Independent contractor or employee?). The Department of Labor says misclassified employees may not receive the minimum wage and overtime they are entitled to, and that employers are responsible for working out whether a worker is an employee (DOL Wage and Hour Division: Misclassification of employees as independent contractors).

If the answer is unclear, either the business or the worker can file Form SS-8 and ask the IRS for an official ruling (IRS: About Form SS-8). The IRS says a ruling can take at least six months (IRS: Independent contractor or employee?). States run their own tests for workers' comp and unemployment, and rules differ by state, so check with your accountant or state. Our Arizona handyman page is one example of how local rules are laid out.

When does hiring an employee make sense for a handyman?

An employee fits when the work is yours to direct. Signs you are ready:

  • You turn down small jobs every week because your calendar is full.
  • You do two-person tasks alone, like hanging a solid door or carrying a vanity up stairs.
  • You want someone you can train on your standards for caulk lines, patching and cleanup.
  • You want the customer to see one brand, one shirt and one truck.

The cost is steady payroll even when the phone is quiet. Plan for that before you hire. For a sense of the job market, BLS groups much handyman-style work under general maintenance and repair workers. Their median pay was $49,590 a year, or $23.84 an hour, in 2025. BLS says these workers usually start by watching and learning from skilled maintenance workers, and that most work full time (BLS Occupational Outlook Handbook: General Maintenance and Repair Workers). That fits a helper you train yourself.

BLS also says general maintenance and repair workers have one of the highest rates of injuries and illnesses of all occupations. That is one reason the workers' comp line in the table matters.

When do subcontractors make sense for a handyman?

Subs fit when the work is a whole job someone else can own. Three common cases:

  • Licensed trades. Some states carve trade work out of what a handyman can do without a license. New Mexico's handyman certificate, for example, does not cover installing, connecting or repairing electrical wiring, plumbing or gas fitting (New Mexico 14.6.2.8 NMAC). Limits vary by state. When a customer wants a new circuit or a water heater swap, a licensed sub can take that part. See our guide to handyman license rules and your website for how those limits differ.
  • Specialty work. Drywall finishing on a big patch, tile, or flooring can go to a sub who does that all day and brings their own tools.
  • Overflow in busy months. A small handyman business with its own customers may take a defined job from you for a set price in a busy week.

Treat each sub as a business. Get a written scope and price, proof of their own insurance, and any license the work needs. Do not set their hours or hand them your tools.

Can you use both?

Yes, and many handyman businesses do. A common setup is one W-2 helper who rides with you on the daily route, plus a short list of licensed subs for trade work you cannot or should not do. Keep the two groups clearly separate in how you pay and direct them.

How do you make your first handyman hire?

Step 1: Decide the role

Write down the jobs this person will do and how you will direct them. If you will set their day and train them, plan for an employee. If you will hand off whole jobs, plan for a sub.

Step 2: Write a plain ad

Say the pay, hours, the kind of jobs and what you supply. Here is a sample. The town is an example only.

Handyman helper, full time (Lancaster, Pennsylvania, example) We fix doors, drywall, trim, fixtures and small repairs in homes. You will ride with our lead tech, carry tools and materials, and learn the work. Pay: $[your rate] an hour, paid weekly. Hours: about 8 a.m. to 4:30 p.m., Monday to Friday. You need a valid driver's license. No experience needed if you are handy and on time. Apply on our website or text [your number].

Step 3: Post it where handy people look

Post it on your own website's careers page first, then on job sites, local groups and at your hardware store counter. Ask other trades you trust who they know.

Step 4: Pay for a trial day

Bring the best two or three people on a real day of jobs and pay them. Watch how they handle tools, talk to the homeowner and clean up. Check one or two references from past bosses.

Step 5: Do the paperwork

For an employee: get an EIN, which the SBA lists as step one of payroll setup, and set up workers' comp, which the SBA lists as a required benefit. The SBA says unemployment insurance varies by state, and its example business reports new hires to its state within 20 days (SBA: Hire and manage employees). Complete Form I-9 for every hire (USCIS: Form I-9) and keep a signed Form W-4 on file (IRS: Hiring employees).

For a sub: have them complete Form W-9 and keep it four years, then report payments on Form 1099-NEC when they meet the yearly threshold (IRS: Forms and associated taxes for independent contractors). Ask your accountant for the current threshold.

Step 6: Set up how you hand off jobs

Put the job notes, photos and address in one place your helper or sub can see. Field-service apps can help here. Our guide to the best handyman software compares options.

Should your handyman website have a careers page?

Yes. A careers page gives every ad one link and tells homeowners you have a real team. List the role, pay, hours, a photo of your crew, and a short form.

Google supports job posting structured data, a small block of code that describes the job. Google says it makes a posting eligible for its job search experience, and also says it does not guarantee the feature will show. It also says expired postings are not allowed, so take the job down or mark it expired once it is filled (Google Search Central: Job posting structured data). See what a handyman website should include for where it fits on the site.

What comes after the first hire?

A second person only pays off if the calendar stays full. That is the growth side of the business, covered in how to grow your handyman business. Homeowners also check who will be in their house, so the hub guide on how people tell if a contractor is legit is worth a read before you send a new hire alone. If you want a site with a careers page built in, see a free demo site.

Common questions

Is a handyman helper a W-2 or a 1099?

It depends on the facts. A helper who works your hours, uses your tools and does the work your way usually looks like an employee under the IRS tests. Check with your accountant or state before you decide.

Can I pay a handyman helper cash?

Paying cash does not change whether they are an employee. If the facts point to employee, you still need to handle payroll taxes, Form I-9 and the other employee steps. Ask your accountant how to set it up.

Do I need workers' comp for one helper?

The SBA lists workers' compensation as a required benefit for businesses with employees. Rules on who must carry it, and when, vary by state. Check your state's workers' comp board.

Should a handyman sub out electrical and plumbing work?

Often, yes. Some states, such as New Mexico, exclude electrical, plumbing and gas work from what a handyman may do without a trade license, and the limits vary by state. A licensed sub can take that part of the job while you handle the rest.

What should I pay a first handyman helper?

BLS put the median for general maintenance and repair workers at $23.84 an hour in 2025. A new helper with little experience may start lower, and local rates vary. Check what other trade jobs near you pay.

Sources

About the author

Ansh Singh runs Contractor Websites. He builds websites for electricians, plumbers, roofers and other home service trades, and writes the guides on this site. More about Ansh Singh.

Want a site that does all this for you?

We build your new website free, before you pay, then work every week to get you named when homeowners ask Google and AI who to call. Get your free demo site.

Free tool: is ChatGPT naming you or your competitor?

Check your AI search score in 30 seconds. No sign up.

Check my AI search score →

Want AI to recommend your business? We build your new site free.

Get my free demo site →